• Tweet

• Tweet

Show me your design on instagram, facebook or email info@pursebuzz.com for your chance to win!

#diypursebuzz

You Will Need

• 3 Round or square Styrofoams
• Glue
• Scissors
• Glitter of your choice
• Mod Podge (seal in loose glitter)
• Metal Stick or wooden stick
• Ribbon -Make sure its the right widthSteps:
  • Lightly trace the smaller circles on the larger one.
  • Create holes for your lipsticks. I prefer 3/4 inch to start. Home depot and art stores has a variety of options.
  • Be careful not to break the foam.  Glue it back together if needed. Avoid Hot Glue on Foam.
  • Once done, puncture the hole completely and make sure you lift your foam up.
  • Take a little extra time on the smallest circle. Dot around it to create your face pattern. Create different hole sizes for different products.
  • Use an art foam stick to make holes it makes this part easy!
  • Use your other hand to steady the foam.
  • Using a paper plate add mod Podge. This will thicken the paint, fill in holes and dilute it so you use less paint. But totally optional.
  • Next take a water based or foam safe paint and add to the mix.
  • Pour in some glitter. There will be other glitter options later.
  • Fold and mix everything in the begin to  and paint.
  • You can use foam on a stick but I prefer a brush.
  • Use a stippling motion to get the paint into the crevices of the foam.
  • Moving on to the next circle. Only paint the outer edge to save time and paint.
  • Option 2 for glitter: Use a glitter paint. This will give you a subtle glitter finish.
  • Option 3 for glitter : Pour and sprinkle loose glitter onto wet paint.  Place a sheet of paper to catch the loose glitter.
  • Hate glitter fall out? Paint on Mod Podge over the glitter. Use the gloss finish for a glossy finish.
  • Let everything dry over night.
  • Size and match ribbon to edges of the styrofoam.
  • Glue ribbon down.
  • Over lap and glue edge.
  • Create a bow to add a little girllyness. Hot Gluing ribbon works best.
  • Glue bow to stand with fabric glue.
  • Glue down circles together using Mod Podge or any foam safe glue.
  • Let everything dry completely before use.

  

  

  

bloggers DIY 100 Lipstick Holder (Ultimate Lipstick Holder) featured